Marmitek IP RoboCam 10 is supported by ipCam FC (iPhone/iPad App)

ipCam FC iPhone App

Overview ipCam FC for iPhone, iPad, iPod Touch

Manufacturers description Marmitek IP RoboCam 10

This description has no relation to the features of the app! Its only a copy of the manufacturers description!

Monitor and protect everything, anywhere, via your network or internet connection Colour security camera with high sensitivity for perfect images at low light conditions. No local PC required! Operate the camera fully remotely: panning, tilting, zooming, adjusting the resolution and many other settings. With the powerful, user friendly UltraView software you can watch and operate up to 16 camera?s simultaneously everywhere in the world. Have images sent to your e-mail address periodically or by motion detection. Program up to 8 camera positions and cycle through them automatically. The pre-set camera positions can be watched with just a push of a button. With GPIO (General Purpose Input and Output); for instance create an image recording automatically by opening a door or switch your lighting based upon (HW/SW) motion detection. Simple installation with enclosed software. This is the Ethernet model. There is also a wireless (802.11b/g) IP RoboCam available.
Technical specifications General Dimensions: 110 x 124 x 101 mm Camera: 1/4” colour CMOS, 640 x 480 pixels Lens F/No: F/No 2.8, 4.6 mm Minimum illumination: 0.1 Lux (Starlight view) Night vision: n.a. View Angle (Diagonal): 60° Pan/Tilt: Pan 330°, Tilt 105° (90° up) Compression: MJPEG, 5 levels Audio in: n.a. Audio out: n.a. Frame rate: Max 30 fps (frame rate depends on the video format and network performance) Resolution: 160 x 120 pixels, 320 x 240 pixels, 640 x 480 pixels Power: 12VDC 1.5A, 230 V, <10 W. Power adapter included Temperature for use: 0°C / +45°C Communication LAN port: RJ45, 10/100Mb auto-sense, auto MDI-X Protocol: TCP/IP, UDP, ICMP,DHCP,NTP,DNS,DDNS, SMTP,FTP, HTTP, PPPoE, UPnP Extra protocols: n.a. Wireless: n.a. Range: dependent on network Events Triggered by: Motion detection (2 scalable windows), GPIO or according to schedule GPIO: 1 input (9~40 V DC) and 1 output (240VAC, 70 mA max) Image Upload/Send: over email, FTP Image format: JPEG Video Upload / Send: n.a. Video format: n.a. Software Web browser: Configured standard web browser with ActiveX and Java (multi password protected and WEP, WPA protection) Application software: UltraView (to view 16 cameras simultaneously) Minimum system requirements General Hardware: CD ROM drive Operating system: MS Windows 2000, XP, Vista, 7 Connection Wired: 10 Base-T Ethernet or 100 Base-TX Fast Ethernet Connection Wireless: n.a. Camera (viewing by webbrowser) Processor: Intel Pentium 3, 350 MHz or above Memory: 128 MB RAM 5 MB free disk space Web browser: Supporting ActiveX and Java UltraView software Processor: Pentium 3, 800 MHz or above Memory: 512 MB RAM 500 / 1000 MB free disk space
More supported Marmitek IP Cameras IP Eye Anywhere 10, IP Eye Anywhere 11, IP Eye Anywhere 241, IP Eye Anywhere 341, IP Eye Anywhere 470, IP RoboCam 10, IP RoboCam 11, IP RoboCam 541, IP RoboCam 641, RoboDome 10,
HomePrivacyImprintForum