AirLink101 SkyIPCam 1747W wird von ipCam FC (iPhone/iPad App) unterstützt

ipCam FC iPhone App

Übersicht ipCam FC für iPhone, iPad, iPod Touch

Hersteller Beschreibung AirLink101 SkyIPCam 1747W

Diese Beschreibung bezieht sich nicht auf den Funktionsumfang der hier angebotenen Apps! Es ist nur eine Kopie der Hersteller Beschreibung!

Wireless N Night Vision Pan/Tilt Network Camera MJPEG Codec Supported The camera provides you with excellent images by the MJPEG codec technology, allowing you to adjust image size and quality, and bit rate according to the networking environment.  2-way Audio Capability The built-in microphone of the camera provides on-the-spot audio via the Internet, allowing you to monitor the on-site voice. In addition, you can connect an external speaker to the camera to talk to people at the camera view.  Day & Night Surveillance Supported The seven Infrared LEDs around the standard lens assembly enable the camera to capture crystal clear images in dark environments or at night. When the Light Sensor detects the environmental light level as being too low, the camera captures the images in black & white mode using these infrared LEDs.  Optimal Viewing With the pan/tile functions, you can easily monitor everywhere via the camera by moving the camera lens to the left/right (165/165 degrees) or up/down (90/15 degrees). In addition, you can assign up to eight positions for the camera, enabling you to move the camera lens to the desired position quickly.  I/O Connectors Provided The camera provides the I/O connectors on the rear panel (IN/OUT), which provide the physical interface to send and receive digital signals to a variety of external alarm devices. You can connect a special featured device, and then configure the settings and control the device from the GPIO Trigger window of Web Configuration.  Remote Control Supported By using a standard Web browser or the complimentary software SkyIPCam UltraView application, the administrator can easily change the configuration of the camera via Intranet or Internet. In addition, the camera can be upgraded remotely when a new firmware is available. The users are also allowed to monitor the image and take snapshots via the network.  Multiple Platforms Supported The camera supports multiple network protocols, including TCP/IP, SMTP e-mail, HTTP, and other Internet related protocols. Therefore, you can use the camera in a mixed operating system environment, such as Windows 7 and Windows XP.  Multiple Applications Supported Through the remote access technology, you can use the cameras to monitor various objects and places for your own purposes. For example, babies at home, patients in the hospital, offices and banks, and more. The camera can capture both still images and video clips, so that you can keep the archives and restore them at any time.
Technische Daten Image Sensor Sensor 1/4” color CMOS Resolution 640x480 Video Compression MJPEG Video resolution VGA/QVGA/QQVGA; 30fps max. Audio Input Built-in MIC Output Headphone output jack (Mono) Codec PCM User Interface LAN One RJ-45 port Antenna One external antenna Reset One reset button WPS One WPS button (EZ Setup Button) GPIO 1 in/1 out connectors Input: active high: 9~40V DC; dropout: 0V DC Output: close circuit current 70mA AC or 100mA DC maximum, 30 Ohm; open circuit voltage 240V AC or 350V DC maximum LEDs Power (amber); Link (green) System Hardware Processor ARM9 base RAM 32MB SDRAM ROM 4MB NOR Flash Power DC 12V Communication LAN 10/100Mbps Fast Ethernet, auto-sensed, Auto-MDIX WLAN IEEE 802.11b/g/n, data rate of up to 150Mbps* Protocol support TCP/IP, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, PPPoE, UPnP Pan/Tilt Pan 165 degree (left) to 165 degree (right) Tilt 90 degree (up) to 15 degree (down) Software OS Support Windows 7/Vista/XP Browser Internet Explorer 6.0 or above Apple Safari 2 or above Mozilla Firefox 2.00 or above Software SkyIPCam UltraView for playback/recording/configuration features Operating Environment Temperature Operation: 0°C ~ 45°C Storage: -15°C ~ 60°C Humidity Operation: 20% ~ 85% non-condensing Storage: 0% ~ 90% non-condensing EMI FCC Class B, CE Class B
Weitere unterstützte AirLink101 IP Kameras SkyIPCam 1500Wv2, SkyIPCam 1747W, SkyIPCam 1777W, SkyIPCam 500W,
StartseiteDatenschutzImpressumForum